Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!princeton!allegra!ulysses!mhuxt!ihnp4!inuxc!iuvax!silver!sl109001
From: sl109001@silver.UUCP
Newsgroups: comp.sys.apple
Subject: Re: Dos 3.3 -> ProDos conversion?
Message-ID: <21600008@silver>
Date: Thu, 9-Apr-87 13:56:00 EST
Article-I.D.: silver.21600008
Posted: Thu Apr  9 13:56:00 1987
Date-Received: Sat, 11-Apr-87 15:23:20 EST
References: <524@wheaton.UUCP>
Organization: Indiana University BACS, Bloomington
Lines: 18
Nf-ID: #R:wheaton.UUCP:-52400:silver:21600008:000:1053
Nf-From: silver.bacs.indiana.edu!sl109001    Apr  9 13:56:00 1987


/* Written  1:20 pm  Apr  8, 1987 by stephan@wheaton in silver:comp.sys.apple */
/* ---------- "Dos 3.3 -> ProDos conversion?" ---------- */
How difficult would it be to convert some Dos 3.3 binary programs to run under
ProDos?  I have some old Dos 3.3 stuff I'd like to be able to run off of a 
Apple IIGS 800K 3.5 disk.  I can convert them into ProDos files with the system
disk, but, because they use the Dos 3.3 JMP/JSR addresses, they won't work
under ProDos.  I can run them off of the Dos 3.3 5.25 disk without problems,
so it's not because they won't run on the IIGS.  Any suggestions, or is it
easier to write the manufacturers for upgrades? (Please reply by email).

Thanks in advance.
-- 
-----------------------------------------------------------------------------
uucp: ihnp4!wheaton!stephan                                   Steve Meyer
                                                              Wheaton College
-----------------------------------------------------------------------------
/* End of text from silver:comp.sys.apple */