Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!husc6!seismo!cmcl2!acf3!sxt2443
From: sxt2443@acf3.UUCP
Newsgroups: comp.sys.atari.8bit
Subject: Re: Info-Atari8 Digest V87 #23
Message-ID: <1460002@acf3.UUCP>
Date: Mon, 30-Mar-87 21:15:00 EST
Article-I.D.: acf3.1460002
Posted: Mon Mar 30 21:15:00 1987
Date-Received: Thu, 2-Apr-87 01:07:32 EST
References: <8703300315.AA16418@mitre-bedford.ARPA>
Organization: New York University
Lines: 27

>In fact, I would think you would have to run the TRANSLATOR DISK to
>get vt10sq to work at all with a standard 130XE but you would NOT need
>the translator disk to run it with OMNIVIEW.  However, all of my
>OMNIVIEW experience has been with an 800XL with Newell 256KXL upgrade.
>
>-John Sangster

	VT10^2 does work with a 130XE.  I use it with an MPP-1000E
(Supra 300AT) modem.  If you load Matt Ratcliff's (sp?) BASIC Switcher
to knock out BASIC (I hate using <OPTION>), then _Analog's_ Home-Made
Translator (or any other translator I guess) , and finally VT10^2
everything works fine.

	I am interested in using OMNIVIEW (with OMNICOM) on my XE.
Does anyone know where I can get more info on it?  This month's
_Analog_ and _Antic_ don't seem to have any adds for the company that
makes it (CDY right?).  Will it work with an MPP modem?  Is it
possible to use the Fastchip without OMNIVIEW?

Live Long and Prosper,
SNAFU
the OMEGAMAN Rocket Scientist
(aka Brian Reynolds)
email: c00.b-reynolds@nyu20 (nyu-gba's dec-20)
or     sxt2443@acf3 (this is a friend's account.  please send email here only
		if you can't reach the dec.  sending to this board is 
		probably best.)