Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!sri-spam!ames!ptsfa!ihnp4!homxb!houxm!houxj!wkk
From: wkk@houxj.UUCP
Newsgroups: comp.sys.atari.st
Subject: Calling Alan Page
Message-ID: <180@houxj.UUCP>
Date: Mon, 23-Mar-87 14:50:29 EST
Article-I.D.: houxj.180
Posted: Mon Mar 23 14:50:29 1987
Date-Received: Wed, 25-Mar-87 03:03:27 EST
Organization: AT&T Bell Laboratories, Holmdel
Lines: 44
Keywords: Micro-RTX and Megamax

Hello,  I need to get some information from Alan Page regarding
the bindings he wrote for Beckmeyers Micro-RTX and Megamax.

For those of you who are not Alan Page but know about his whereabouts,
send me mail.

If you happen to be Alan Page, I need to resolve some problems I am having
using your bindings.  First, there seems to be a missing op-code in the _exit
routing, looks like this:

_exit:
	LINK	A6,#0
	MOVE	8(a6),-(a7)
/* pterm call*/ #76,-(a7)
	TRAP	#1
	etc....
clearly, there must be an opcode before the #76 (I think it is probalbly a
move.w).  

Also, even with the above assumption,  the linker complains about fclose.
Even with that removed, the liker is unable to find the RTX calls from
a main program, one of the demos provided.

I did the following after slightly hacking mmrtx.c

mmcc mmrtx.c
mmcc qdemo.c
mmlink qdemo.o mmrtx.o
.
.
.
.
Unresolved refs:

q_create q_delete etc.........

Thanks for your help.

Wesley Kaplow
AT&T
2L-325
Holmdel, NJ 07733
(201)949-0065
ihnp4!houxj!wkk