Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!ucla-cs!sdcrdcf!trwrb!wiley!bob
From: bob@wiley.UUCP
Newsgroups: comp.sys.atari.st
Subject: Re: Thomson monitor in high resolution
Message-ID: <451@laurel.wiley.UUCP>
Date: Thu, 2-Apr-87 14:18:27 EST
Article-I.D.: laurel.451
Posted: Thu Apr  2 14:18:27 1987
Date-Received: Sun, 5-Apr-87 01:04:53 EST
References: <8703310827.AA15450@ucbvax.Berkeley.EDU>
Distribution: world
Organization: TRW Inc., Redondo Beach, CA
Lines: 13
In-reply-to: VOGT@HGRRUG5.BITNET's message of 31 Mar 87 08:02:00 GMT
Posting-Front-End: GNU Emacs 18.36.2 of Mon Feb 23 1987 on laurel (berkeley-unix)


You have two problems to address. The first which you have obviously
thought of is the increased bandwidth required for the monochrome display.
Second, the monochrome display has a 70Hz scan rate. This is different
than it is for the color display (either 50 or 60Hz, I can't remember).
If you can adjust the scan rate of the Thomson monitor, then you
should be able accomplish your goal.

		Good Luck,
		Bob Amstadt

		trwrb.uucp!wiley!bob
		csvax.caltech.edu!wiley!bob