Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!ucla-cs!sdcrdcf!trwrb!aero!aero2!kelem
From: kelem@aero2.UUCP
Newsgroups: comp.sys.cbm
Subject: Re: Wanted: Connector for C64 User Port
Message-ID: <175@aero2.ARPA>
Date: Sat, 28-Mar-87 18:57:01 EST
Article-I.D.: aero2.175
Posted: Sat Mar 28 18:57:01 1987
Date-Received: Sun, 29-Mar-87 23:37:23 EST
References: <347@druxm.UUCP>
Reply-To: kelem@aero2.UUCP (Steve Kelem ATW)
Organization: The Aerospace Corporation, El Segundo, CA
Lines: 34
Keywords: connectors

In article <347@druxm.UUCP> n2ic@druxm.UUCP (LondonSM) writes:
>Can anyone help me locate a source for connectors to plug into
>the C64 User Port ?
>

The connectors required to connect to the Commodore 64 are:

Control Port (joyswitch, paddles)
    generic:	9-pin female D plug, solder pins
    Cinch	DE-9S

Cartridge Expansion Slot
    generic:	.062" thick printed circuit board, 22 pins per side, .1" centers

Audio/Video
    generic:	5-pin male DIN plug
    Radio Shack:274-003

Serial I/O
    generic:	6-pin male DIN plug
    Switchcraft #12BL6M

Cassette
    generic:	6-pin printed circuit board edge connector .062" thick,
		.156" centers
    GC?		A2D06PE08A1
    Cinch	50-12S-20 or 50-12S-30

User I/O
    generic:	12-pin printed circuit board edge connector .062" thick,
		.156" centers
    GC?		A2D12DS08A1
    Cinch	50-24S-20 or 50-24S-30
    TRW		50-24SN-10 251-12-50-171 8325