Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!princeton!allegra!ulysses!faline!thumper!tr
From: tr@thumper.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: Labels Query
Message-ID: <539@thumper.UUCP>
Date: Sat, 28-Mar-87 09:27:55 EST
Article-I.D.: thumper.539
Posted: Sat Mar 28 09:27:55 1987
Date-Received: Sun, 29-Mar-87 18:21:49 EST
References: <351@its63b.ed.ac.uk>
Lines: 28
Keywords: dBase III, Labels, small.

In article <351@its63b.ed.ac.uk>, dougie@its63b.ed.ac.uk (D Nisbet) writes:
> 
> I will be writing a dBase III application which requires that I.D. no.s be
> printed out on labels which will be small enough to stick on to test-tubes.
> Approximate dimensions 1cm X 6cm. Can anyone advise me if these are available,
> and if so, from whom?
> 
> Dougie Nisbet
> University of Edinburgh

I had this same problem.  The best solution I found, which has been in
use now for almost two years, is to use the smallest computer labels
available, which measure about 1 inch by 3 inches, print many numbers
on them, and cut the labels with scissors.

Tom Reingold

INTERNET:       tr@bellcore.com
--------
UUCP:
----		      watmath!clyde!bellcore\
                                ucbvax\       \
     lll-lcc\              ihnp4!mhuxt!ulysses!faline!flash!tr
      seismo!rutgers!mit-eddie!allegra/
-- 
Tom Reingold
Internet: tr@bellcore.com
Uucp: ..!allegra!ulysses!faline!flash!tr