Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!seismo!rochester!kodak!gardner
From: gardner@kodak.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: MS CodeView
Message-ID: <790@kodak.UUCP>
Date: Wed, 8-Apr-87 07:32:44 EST
Article-I.D.: kodak.790
Posted: Wed Apr  8 07:32:44 1987
Date-Received: Sat, 11-Apr-87 07:25:23 EST
References: <1501@ncr-sd.SanDiego.NCR.COM>
Reply-To: gardner@kodak.UUCP (dick gardner)
Organization: Eastman Kodak Co, Rochester, NY
Lines: 41

In article <1501@ncr-sd.SanDiego.NCR.COM> lodman@ncr-sd.UUCP (Michael Lodman) writes:
>I am using MS 4.0 and CodeView on an NCR PC-8 (AT Compatable) with a 
>Video-7 Vega EGA card. My problem is that whenever I start CodeView it
>turns the screen pink and green. Does anyone know how I can make it
>just come up in normal colors? The manual was no help at all.
>
Early in March, Walter Bright (FutureNet Corp - Redmond WA) offered a
patch for Codeview, which I installed on my Original IBM AT using a
QuadEGA+, and it worked like a charm.  My screen colors used to start
up as a garish green and pink, which then could only be 'healed' by
continuing deeper into Codeview, or re-booting.

Here is the patch again, as Walter wrote it:

PATCH for CodeView version 1.00
This patch will disable the saving and restoring of the EGA
palette registers (for those clones that can't do this).

		copy cv.exe cv.dat
		debug cv.dat
		e 2f37
		0
		e 2f6b
		90 90 90
		w
		q
		rename cv.exe cv.old
		rename cv.dat cv.exe

----------------- end of patch ------------------------

Hope this works for you as it did for me.


=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
   Dick Gardner -- Eastman Kodak Co.  Rochester, New York  14650
                   Phone: (716) 477-1002
                   UUCP: {allegra,seismo}!rochester!kodak!gardner
   "Research is what I do when I don't know what I'm doing"
=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#