Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!cagordon
From: cagordon@watnot.UUCP
Newsgroups: comp.sys.cbm,comp.sys.misc
Subject: Re: C-Power 64 sys call -- HELP!
Message-ID: <12812@watnot.UUCP>
Date: Tue, 7-Apr-87 10:40:59 EST
Article-I.D.: watnot.12812
Posted: Tue Apr  7 10:40:59 1987
Date-Received: Thu, 9-Apr-87 03:43:44 EST
References: <1244@ogcvax.UUCP>
Reply-To: cagordon@watnot.UUCP (Chris Gordon)
Organization: U. of Waterloo, Ontario
Lines: 20
Xref: utgpu comp.sys.cbm:313 comp.sys.misc:485

In article <1244@ogcvax.UUCP> schaefer@ogcvax.UUCP (Barton E. Schaefer) writes:
[ article and part of program deleted ]
>	    sys(15,0xffe4,c,&x,&y);	/* call GETIN */
[ ditto ]

Remove the '15' and you will have no problems. The bank parameter is only used
in the 128 version of the compiler - if the manual lists the '15' for the 64
version (which I think shows poorly on the part of ProLine Software) then the
manual is in error.

Chris

--
-------------------------------------------------------------------------------
Chris Gordon                     UUCP: {abunchasystems}!watmath!watnot!cagordon
U of Waterloo, Ont         CompuServe: 72030,104
		               Q-Link: ChrisG22
				CSNET: cagordon%watnot@Waterloo.CSNET
-------------------------------------------------------------------------------
When you care enough to send the very best, send MONEY!