Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!mit-eddie!uw-beaver!tektronix!reed!nscpdc!joer
From: joer@nscpdc.UUCP
Newsgroups: comp.sys.nsc.32k
Subject: Re: getty ignoring tty2
Message-ID: <843@nscpdc.NSC.COM>
Date: Mon, 6-Apr-87 15:14:10 EST
Article-I.D.: nscpdc.843
Posted: Mon Apr  6 15:14:10 1987
Date-Received: Thu, 9-Apr-87 03:38:40 EST
References: <750@runx.ips.oz>
Organization: NSC Portland Development Center
Lines: 28
Summary: Request more info, have phone # to call for NSC Support

In article <750@runx.ips.oz>, rommel@runx.ips.oz (Stephen Joyce) writes:
> 
> After re-making System V.2 for the ICM3216 (with minor alterations to the
> 2681 device-driver) I noticed that GETTY would not notice a terminal
> connected to tty2 (the non-modem port nexto the console) unless it was
> there when the system was booted or when GETTY was respawned. This was
> not the case with the original binary, but is the case if I remake the
> system as supplied (without my device driver changes).
> 
> Michael Katzmann
> ATN channel 7 Sydney

Greetings from National Semiconductor's Portland Development Center,

Michael, 

To help you we need to know what version of the software you
are running.  Please call 503-629-4414 between 8AM and 5PM Pacific
Coast Time.  (Note to all ICM product users within U.S.A.; the number
for product support is 800-222-2433).  As an alternative, contact your 
local NSC sales office or field engineer who will forward your problem to us.

regards,

Joe Rawlings
ICM-Product Support
National Semiconductor Corp.
Portland Development Center