Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!okstate!glass
From: glass@okstate.UUCP
Newsgroups: comp.sys.tandy
Subject: Re: Model 4 in Model III mode
Message-ID: <1802@a.cs.okstate.edu>
Date: Mon, 30-Mar-87 11:19:50 EST
Article-I.D.: a.1802
Posted: Mon Mar 30 11:19:50 1987
Date-Received: Tue, 31-Mar-87 06:59:00 EST
References: <855@wjvax.wjvax.UUCP>
Organization: Oklahoma State Univ., Stillwater
Lines: 20

Jeffery Siou writes:
> 
>    I was wondering if anybody out there is familiar about running a Model 4
> in the Model 3 mode. I've heard that all you had to do is boot up the
> Model 4 with a Model III system disk. Is this correct? ...

In order to use a Model 4 in the Model 3 mode, you need to have the file
"MODELA/III" present on the model 3 diskette.  When the 4 boots, it will
look for this file on your diskette and go into the appropriate mode.  The
"MODELA/III" file should be supplied along with the DOS disk from Radio Shack.

Donnie Glass

-------------------------------------------------------------------------------
Disclaimer:
           
          I didn't do it.

-------------------------------------------------------------------------------
glass@a.cs.okstate.edu