Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!princeton!rocksvax!rocksanne!stein
From: stein@rocksanne.UUCP
Newsgroups: comp.sys.tandy
Subject: Re: Model 4 in Model III mode
Message-ID: <322@rocksanne.UUCP>
Date: Tue, 31-Mar-87 08:50:37 EST
Article-I.D.: rocksann.322
Posted: Tue Mar 31 08:50:37 1987
Date-Received: Thu, 2-Apr-87 06:12:38 EST
References: <855@wjvax.wjvax.UUCP> <1802@a.cs.okstate.edu>
Reply-To: stein@rocksanne.UUCP (Adam Stein)
Organization: Xerox Corp., Webster, NY
Lines: 10

>In order to use a Model 4 in the Model 3 mode, you need to have the file
>"MODELA/III" present on the model 3 diskette.  When the 4 boots, it will
>look for this file on your diskette and go into the appropriate mode.  The
>"MODELA/III" file should be supplied along with the DOS disk from Radio Shack.
>

The file MODELA/III is only needed if running on a 4p.  If you are running
a regular 4, all you need do it boot up using a model 3 disk.

						Adam