Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!husc6!ut-sally!ut-ngp!melpad!paddock
From: paddock@melpad.UUCP
Newsgroups: comp.unix.wizards
Subject: Re: System V lp setup
Message-ID: <207@melpad.UUCP>
Date: Sat, 21-Mar-87 17:41:12 EST
Article-I.D.: melpad.207
Posted: Sat Mar 21 17:41:12 1987
Date-Received: Sun, 22-Mar-87 18:02:29 EST
References: <343@gssc.UUCP> <219@polyof.UUCP> <150@tdi2.UUCP>
Reply-To: paddock@melpad.UUCP (Steve Paddock)
Distribution: comp.unix.wizards
Organization: Gibson, Melvin & Paddock, CPA's
Lines: 9

There has been much discussion of how to add nonstandard printer interfaces
to the Unix System V lp system.  An AT&T technician here showed me the
cleanest trick I have found.  Configure the printer as to port and name
using one of the default interfaces.  Then, as root, replace the
file with the name you just assigned in /usr/spool/lp/interface with
your custom interface.
-- 
Steve Paddock
{ihnp4,allegra,ut-sally}!ut-ngp!melpad!paddock