Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!jensen
From: jensen@utgpu.UUCP
Newsgroups: comp.unix.xenix
Subject: Installing SCO Xenix - no device passed from boot block
Message-ID: <1987Apr8.220439.6594@gpu.utcs.toronto.edu>
Date: Wed, 8-Apr-87 21:04:39 EST
Article-I.D.: gpu.1987Apr8.220439.6594
Posted: Wed Apr  8 21:04:39 1987
Date-Received: Sat, 11-Apr-87 05:40:42 EST
Organization: University of Toronto Computing Services
Lines: 8
Checksum: 44043


Has anyone tried to boot SCO Xenix V2.2 on installation (from the A-drive)
and before reaching Boot -- 
""No device passed from boot block"
We're running an AT 286 clone with a Miniscribe 6053 and a DTC controller
and Phoenix BIOS. The machine also comes up with "No ROM Basic available
will reboot" when booting from DOS.
Mike Jensen