Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!lll-lcc!ames!ucbcad!ucbvax!NTT-20.MIT.EDU!yaski
From: yaski@NTT-20.MIT.EDU.UUCP
Newsgroups: comp.windows.x
Subject: ximpv on SUN
Message-ID: <12289310068.23.YASKI@NTT-20.NTT.JUNET>
Date: Thu, 26-Mar-87 11:56:25 EST
Article-I.D.: NTT-20.12289310068.23.YASKI
Posted: Thu Mar 26 11:56:25 1987
Date-Received: Fri, 27-Mar-87 06:18:51 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: NTT Basic Research Laboratories, NTT Corporation
Lines: 14

I am currently working on Japanese TeX and wants to preview the output of
JTeX.  The easiest way seems to me to use "ximpv" because we are using
IMAGEN printer as output device.  However, ximpv in V10R4 does not work
properly on our SUNs (on both SUN2 and SUN3).
As far as I can tell from the output of ximpv (it works but the output
is wrong), there must be some byte swapping somewhere in the program.

Do you know this bug?
Or do I made some mistakes in the installation process?

I will appreciate your help.

	-yaski
-------