Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ihnp4!ihlpf!straka
From: straka@ihlpf.UUCP
Newsgroups: sci.electronics
Subject: Fiber optic bundles
Message-ID: <1385@ihlpf.ATT.COM>
Date: Thu, 9-Apr-87 08:44:30 EST
Article-I.D.: ihlpf.1385
Posted: Thu Apr  9 08:44:30 1987
Date-Received: Sat, 11-Apr-87 15:45:56 EST
References: <3483@ihlpa.ATT.COM> <1524@umd5.umd.edu>
Organization: AT&T Bell Laboratories - Naperville, Illinois
Lines: 16
Keywords: Supplier?
Summary: Needed: Fiber optic plates.


I need a fiber optic "plate" or bundle of the surplus kind that I used
to see in Edmund Scientific catalogs 10-15 years back.  The variety were
typically 1" x 2", with a thickness of 1/4" to 3/4".  The idea is to
project (and as a side effect, collimate) an image from the back of the
plate to the front.

BTW, you can thank GM design for the need for this item!

Any leads?

I know this is not the right newsgroup, but I would suspect that others
in netland with electronics background share optics as a common interest.

-- 
Rich Straka     ihnp4!ihlpf!straka