Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!rutgers!caip!scarter
From: scarter@caip.RUTGERS.EDU (Stephen M. Carter)
Newsgroups: comp.dcom.lans
Subject: Re: Seeking information on 3Com Etherlink PC LAN board
Message-ID: <4193@caip.RUTGERS.EDU>
Date: Wed, 22-Apr-87 02:43:15 EST
Article-I.D.: caip.4193
Posted: Wed Apr 22 02:43:15 1987
Date-Received: Thu, 23-Apr-87 05:15:38 EST
References: <1747@dg_rtp.UUCP>
Reply-To: scarter@caip.rutgers.edu (Stephen M. Carter)
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 9

In article <1747@dg_rtp.UUCP> freedman@dg_rtp.UUCP (Stuart Freedman) writes:
>I need technical information when programming the 3Com LAN board. 
>Specifically I seek information about any known hardware problems 
>when writing code for the 3Com board.

(assuming you are talking about Etherseries PC boards, sorry if you are not)
Look at getting the MIT or Stanford versions of PC-TCP package.  Both the
programmers manual (at least in the MIT package) and the driver source code
should help a great deal.