Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!princeton!allegra!ulysses!faline!thumper!tr
From: tr@thumper.UUCP
Newsgroups: comp.dcom.modems,comp.sys.ibm.pc
Subject: How do I transfer files through a telenet connection?
Message-ID: <634@thumper.UUCP>
Date: Mon, 13-Apr-87 12:26:38 EST
Article-I.D.: thumper.634
Posted: Mon Apr 13 12:26:38 1987
Date-Received: Sun, 19-Apr-87 00:17:10 EST
Organization: BellCoRe (Bell Communications Research)
Lines: 23
Xref: mnetor comp.dcom.modems:463 comp.sys.ibm.pc:3331

[]

I often call my host by dialing Telenet and connecting
through it.  Apparently, there is a "transparent"
protocol going on while I am typing and receiving text
data.  But when I try to use Xmodem, Kermit, or Vtrans
(a proprietary protocol that comes with Vterm, a
commercial terminal emulator for the IBM PC), the transfer
fails in the first packet.

It sounds like I am out of luck unless there are some
Telenet tricks I should know about.  Are there?

(Reply by posting or email; I don't care which.  Posting
might be interesting to others.)



-- 
Tom Reingold
INTERNET:       tr@bellcore.com
UUCP: 		..!decvax!ucbvax!ulysses!bellcore!tr
		     ihnp4!mhuxt/