Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!lll-lcc!pyramid!voder!wlbr!pete
From: pete@wlbr.UUCP
Newsgroups: comp.dcom.modems
Subject: Re: modem detecting busy signal.
Message-ID: <1021@wlbr.UUCP>
Date: Thu, 30-Apr-87 12:19:52 EDT
Article-I.D.: wlbr.1021
Posted: Thu Apr 30 12:19:52 1987
Date-Received: Fri, 1-May-87 05:36:35 EDT
References: <8704291527.AA14475@ucbvax.Berkeley.EDU>
Reply-To: pete@wlbr.UUCP (0000-Pete Lyall)
Distribution: world
Organization: Eaton IMS, Westlake Village, CA
Lines: 23

In article <8704291527.AA14475@ucbvax.Berkeley.EDU> TNETE1NN@CLVM.BITNET writes:
>I have a Capetronic 1200 modem.  It is said to be fully Hayes
>compatible and I haven't had any trouble with it until now.
>If I call a number and it rings, it says "CONNECT ..... RING RESPONSE".

Perhaps you have never been exposed to an actual HAYES 1200 - its
'CONNECT' responses are limited to either 'CONNECT' and 'CONNECT
1200'. Additionally, there is no capacity for busy signal detect. 'Busy'
or 'no answer' are the same here, i.e. 'NO CARRIER'.




-- 
                                                   Pete Lyall

Usenet:     {trwrb, scgvaxd, ihnp4, voder, vortex}!wlbr!pete
Compuserve: 76703,4230 (OS9 SIG Sysop)
OS9 (home): (805)-985-0632 (24hr./1200 baud)
Phone:      (818)-706-5693 (work 9-5 PST)

EATON Corp, IMSD, 31717 La Tienda Dr., Westlake Village, Ca. 91359
----------------------------------------------------------------------