Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!husc6!necntc!jeff
From: jeff@necntc.NEC.COM (Jeff Janock)
Newsgroups: comp.dcom.modems
Subject: Re: Hayes 1200/new features
Message-ID: <3983@necntc.NEC.COM>
Date: Tue, 5-May-87 20:26:38 EDT
Article-I.D.: necntc.3983
Posted: Tue May  5 20:26:38 1987
Date-Received: Thu, 7-May-87 05:50:12 EDT
References: <3521@gitpyr.gatech.EDU> <2986@well.UUCP> <491@paul.RUTGERS.EDU> <496@john.paul.RUTGERS.EDU> <499@applix.UUCP>
Organization: NEC Electronics Inc.  Natick, MA 01760
Lines: 16
Keywords: Busy signal detection

In article <499@applix.UUCP> jim@applix.UUCP (Jim Morton) writes:
>
>An easy way to tell the newer Hayes Smartmodem 1200's is to look under
>the front panel, if there are 8 DIP switches it's an older model, if
>it has 10 it's a new one.
>

Nice to have something to check...

Sure enough, this old Hayes 1200 has only eight switches.

ATX4 turns on the verbose connect message ie. CONNECT 1200
vs just CONNECT

Jeff Janock - NEC Electronics +1 617 655 8833 jeff@necntc.NEC.COM
{ames, decvax, harvard, linus, mit-eddie}!necntc!jeff