Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!utgpu!water!watmath!orchid!clyde!rutgers!mit-eddie!genrad!decvax!ucbvax!XX.LCS.MIT.EDU!JSOL From: JSOL@XX.LCS.MIT.EDU.UUCP Newsgroups: comp.dcom.telecom Subject: (none) Message-ID: <8704150627.AA25812@ucbvax.Berkeley.EDU> Date: Wed, 15-Apr-87 01:27:13 EST Article-I.D.: ucbvax.8704150627.AA25812 Posted: Wed Apr 15 01:27:13 1987 Date-Received: Sat, 18-Apr-87 00:34:38 EST Sender: daemon@ucbvax.BERKELEY.EDU Distribution: world Organization: The ARPA Internet Lines: 33 Approved: telecom@xx.lcs.mit.edu I live in the 213 Area code in L.A. I recently moved, and want to get two lines for my new abode, one of which I will use exclusively for a modem line. When I talked to Pacific Bell I was told I could (for a nice high fee, of course) get a `Data Access Line' which would (presumably) run from the local switching office to my home; a higher grade line would replace the normal voice grade phone line. I was told that this was recommended for anyone doing data transmissions of 2400 baud or higher. I almost bit; but then I thought, what about the rest of the way? I would be calling JPL in Pasadena 99% of the time, which is in Area code 818, prefix 354. Since I'm not a TELECOM expert, I just surmised that the calls I would make would go from my home, over my `good' data line, to the local switching office; then to whatever the local switching office for Pasadena is, and then over a (presumably) standard voice grade line to my other modem. My question for you experts is (a) is this something like the real path that the call will take (3 hops; home <=> switching office <-> s.office#2 <-> work) and (b) if this is so, then is there any point in getting a higher grade line for one's home, when one has no control over the line quality for the other 2/3 of the connection ?!? Direct replies appreciated ... ReSent-Date: Wed 15 Apr 87 01:55:00-EDT ReSent-From: The Moderator (JSol) ReSent-Sender: JSOL@XX.LCS.MIT.EDU.#Internet ReSent-To: Telecom-Individual-Messages-List: ; ReSent-Message-ID: <12294618227.61.JSOL@XX.LCS.MIT.EDU> - Greg Earle JPL smeagol!earle@jpl-elroy.ARPA [aka] smeagol!earle@elroy.JPL.NASA.GOV seismo!cit-vax!elroy!smeagol!earle sdcrdcf!smeagol!earle earle@jplpub1.JPL.NASA.GOV (For those with daring Name Servers :-)