Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!orchid!clyde!rutgers!mit-eddie!genrad!decvax!ucbvax!kodak.UUCP!ciaraldi%rochester.ARPA
From: ciaraldi%rochester.ARPA@kodak.UUCP.UUCP
Newsgroups: comp.dcom.telecom
Subject: IBM System 36 Telecom Info Wanted
Message-ID: <26989@rochester.ARPA>
Date: Tue, 14-Apr-87 12:42:55 EST
Article-I.D.: rocheste.26989
Posted: Tue Apr 14 12:42:55 1987
Date-Received: Sat, 18-Apr-87 00:35:34 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: rochester!ciaraldi@seismo.CSS.GOV (Mike Ciaraldi)
Distribution: world
Organization: U of Rochester, CS Dept, Rochester, NY
Lines: 20
Approved: telecom@xx.lcs.mit.edu


Is there any way to set up an IBM System 36 so it can
call other systems?

In particular, I know someone with a 36, who wants to communicate
by modem to a VAX/VMS system.  I heard that the 36
has only synchronous communication, no asynch.

What I would really like would be something that lets
him emulate a VT100 with his 36 terminals.

Failing that, is there an easy way to connect an IBM PC or compatible
to a 36?  Thenit could be used to capture data from the VAX
and upload it to the 36.

Thanks,

Mike Ciaraldi
ARPA: ciaraldi@cs.rochester.edu
uucp: seismo!rochester!ciaraldi