Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ames!ucbcad!ucbvax!uvacs.UUCP!uucp
From: uucp@uvacs.UUCP.UUCP
Newsgroups: comp.os.vms
Subject: Submission for mod-computers-vax
Message-ID: <8704260341.AA03369@uvacs.cs.virginia.edu>
Date: Sat, 25-Apr-87 22:41:48 EDT
Article-I.D.: uvacs.8704260341.AA03369
Posted: Sat Apr 25 22:41:48 1987
Date-Received: Fri, 1-May-87 04:20:27 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 24

Path: uvacs!virginia!umd5!eneevax!mimsy!seismo!rutgers!mit-eddie!genrad!decvax!ucbvax!mala.bcc.CDN!dunnett
From: dunnett@mala.bcc.CDN (Malcolm Dunnett)
Newsgroups: mod.computers.vax
Subject: Ultrix 32m and Decserver 200s
Message-ID: <131*dunnett@mala.bcc.cdn>
Date: 24 Apr 87 18:51:17 GMT
Sender: usenet@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 13

I'm trying to use some Decserver 200s with Ultrix 32m. The Vax 
seems to start LAT protocol (lcp -d seems to say the right things ), but
the Decserver isn't seeing the node or service offered. The server is
seeing a service offered by a VMS system, so it seems to be working ok.

When I do a lcp -c on the microvax all the counters are 0.  The deqna
seems to be functioning (I can do a Boot XQ and it loads the file ).

I don't know much about Ultrix, I'm following the examples in the
documentation. Any suggestions about what to try next would be much appreciated.

Malcolm Dunnett
Malaspina College.