Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!im4u!milano!MCC.COM!PKG.SPARKMAN
From: PKG.SPARKMAN@MCC.COM (Aubrey Sparkman)
Newsgroups: comp.sys.amiga
Subject: RRD filling
Message-ID: <12293022048.57.PKG.SPARKMAN@MCC.COM>
Date: Wed, 8-Apr-87 22:46:56 EST
Article-I.D.: MCC.12293022048.57.PKG.SPARKMAN
Posted: Wed Apr  8 22:46:56 1987
Date-Received: Mon, 13-Apr-87 06:07:04 EST
Lines: 25
To: comp.sys.amiga@MILANO.SW.MCC.COM



In Message <1807@vax135.UUCP> Charles Poirier <cjp%vax135.UUCP@milano> writes:

>I've found RRD to be a tremendous help in program development.  There's
>enough room in my vd0: to store lots of nice utilities but there's no
>room for these utilities on my Manx compiler disk.  So, I first boot
>my Workbench which starts up from a script which loads all the utilities
>I want into vd0:.  Then I pop in Manx and reboot (to set up all the
>Manxish thingies) and still have those utilities on-line!  Great stuff.
>
>	Charles Poirier


I also wanted more in my RRD than would fit on one disk.  My solution was
to put a line in my startup sequence (copy wb2: to vd0: all) to get the
rest of the stuff.  It even reminds me to put in volume wb2 in case I
forget.  Could this save you from doing a reboot?

And thanks, Perry.

Aubrey

I disclaim sanity.
Pkg.sparkman@mcc.com
-------