Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!mit-eddie!uw-beaver!tektronix!tekgen!tekred!joels
From: joels@tekred.TEK.COM (Joel Swank)
Newsgroups: comp.sys.amiga
Subject: Re: autoconfig
Message-ID: <1107@tekred.TEK.COM>
Date: Wed, 22-Apr-87 12:07:35 EST
Article-I.D.: tekred.1107
Posted: Wed Apr 22 12:07:35 1987
Date-Received: Fri, 24-Apr-87 23:36:50 EST
References: <1524@zeus.TEK.COM> <6838@watmath.UUCP> <1203@ulowell.cs.ulowell.edu>
Distribution: na
Organization: Tektronix Inc., Beaverton, Or.
Lines: 12

In article <1203@ulowell.cs.ulowell.edu>, page@ulowell.cs.ulowell.edu (Bob Page) writes:
> 
> The whole point of autoconfig is that you don't need DIP switches.
> ..Bob

No, the whole point of autoconfig is that you don't need addmem. The board
must know where it resides and tell dos where that is at boot time. You
still need switches to tell the board where it goes. Otherwise it would
be set at the factory and unchangeable.

Joel Swank
Tektronix, Redmond, Oregon