Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!mit-eddie!gary
From: gary@eddie.MIT.EDU (Gary Samad)
Newsgroups: comp.sys.amiga
Subject: Need a special RGB connector for a projection TV...
Message-ID: <5636@eddie.MIT.EDU>
Date: Tue, 28-Apr-87 18:42:44 EDT
Article-I.D.: eddie.5636
Posted: Tue Apr 28 18:42:44 1987
Date-Received: Thu, 30-Apr-87 03:20:08 EDT
Organization: MIT EE/CS Computer Facility, Cambridge, MA
Lines: 18

<>

Do any of you have experience hooking your Amiga up to an RGB TV?

Specifically, I'll be hooking my Amiga up to a projection TV (Sony 1020 I
think) and am wondering if there are any pitfalls.  Also, the necessary
pinout for generating analog R, G, B, and sync would be very helpful.  Since
I'm no hardware type, I'd also appreciate any info on the length of cable
that the Amiga can drive, and whether it should be specially shielded, or
whatever else you video gurus think.

I'm a little worried because I have heard from the shop I'll be renting the
TV from that Commodore came to Boston with cable in hand, prepared to do
just this but were not successful and ended up using the composite output
instead.  I'd hate to have to do that!

	Thanks,
	Gary