Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!seismo!ut-sally!utah-cs!utah-gr!uplherc!esunix!blgardne
From: blgardne@esunix.UUCP
Newsgroups: comp.sys.amiga
Subject: Re:  SetPrefs (was C-Ltd hard disk)
Message-ID: <80@esunix.UUCP>
Date: Wed, 29-Apr-87 11:09:48 EDT
Article-I.D.: esunix.80
Posted: Wed Apr 29 11:09:48 1987
Date-Received: Sat, 2-May-87 03:18:25 EDT
References: <416@pttesac.UUCP>
Distribution: na
Lines: 21

in article <416@pttesac.UUCP>, vanam@pttesac.UUCP says:
> 
> That reminds me.  Does anyone have a program that will allow changing
> the morerows setting in the system-configuration file or the printers
> setting in the system-configuration file without running preferences
> and without rebooting (to change morerows) ?
 
  Almost! There is a program called Setprefs that will allow you to change
system-configuration files on the fly. The sys-config files can have any
name, you just have to specify tha path & filename. But, even if
MoreRows hasn't been used on a given sys-config, SetPrefs has no effect 
on the morerows setting.
 
  The biggest use I've seen for SetPrefs is to change the mouse pointer,
and the Workbench colors on the fly. There are several nice sys-config
files on PLink. (Fred, how about a Fish Disk full of
system-configuration files?)
-- 
Blaine Gardner @ Evans & Sutherland
UUCP Address:   {ihnp4,decvax}!decwrl!esunix!blgardne
Alternate:      {ihnp4,seismo}!utah-cs!utah-gr!uplherc!esunix!blgardne