Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!cbmvax!grr
From: grr@cbmvax.cbm.UUCP (George Robbins)
Newsgroups: comp.sys.amiga
Subject: Re: Need a special RGB connector for a projection TV...
Message-ID: <1813@cbmvax.cbmvax.cbm.UUCP>
Date: Thu, 30-Apr-87 19:02:46 EDT
Article-I.D.: cbmvax.1813
Posted: Thu Apr 30 19:02:46 1987
Date-Received: Tue, 5-May-87 04:38:52 EDT
References: <5636@eddie.MIT.EDU>
Reply-To: grr@cbmvax.UUCP (George Robbins)
Organization: Commodore Technology, West Chester, PA
Lines: 23

In article <5636@eddie.MIT.EDU> gary@eddie.MIT.EDU (Gary Samad) writes:
>
>Do any of you have experience hooking your Amiga up to an RGB TV?
>
>Specifically, I'll be hooking my Amiga up to a projection TV (Sony 1020 I
>think) and am wondering if there are any pitfalls.  Also, the necessary
>pinout for generating analog R, G, B, and sync would be very helpful.  Since
>I'm no hardware type, I'd also appreciate any info on the length of cable
>that the Amiga can drive, and whether it should be specially shielded, or
>whatever else you video gurus think.

	I don't think you should have any problems, as long as you get
ahold of the projection TV ahead of time and make sure you have the
right connector and can test it out.

	The Composite sync and analog RGB should be capable of driving
a resonably long cable say 10-25 feet without any degredation that would
be noticable on a projection TV.  Don't make it any longer than you have
to, though.
-- 
George Robbins - now working for,	uucp: {ihnp4|seismo|rutgers}!cbmvax!grr
but no way officially representing	arpa: cbmvax!grr@seismo.css.GOV
Commodore, Engineering Department	fone: 215-431-9255 (only by moonlite)