Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-lcc!pyramid!pyrtech!hernan
From: hernan@pyrtech.UUCP (Hernan 'Jackie' Macapanpan)
Newsgroups: comp.sys.amiga
Subject: Re: DTERM 1.10
Message-ID: <996@pyrtech.UUCP>
Date: Tue, 5-May-87 01:24:06 EDT
Article-I.D.: pyrtech.996
Posted: Tue May  5 01:24:06 1987
Date-Received: Wed, 6-May-87 01:23:43 EDT
References: <8704271942.AA03417@cory.Berkeley.EDU>
Organization: Pyramid Technology RTOC
Lines: 25
Summary: I can't get xreceive to work...


	------ Yum line ------

		I can't seem to get xreceive or xtransmit to work. I've
	tried all parity, stop, bits and command line options. It hangs
	without even transfering a packet and times out. Actually, at
	"bits 8 parity off", it does transfer 1 packet but gets errors
	on the second and times out. I am emulating a "wyse50" using
	"baud 1200 parity off bits 7 stop 1", (why doesn't it work at
	bits 8?) Is there something that I'm missing or is this a bug.
	I hope someone can enlighten me.

		Much thanx in advance,

		Jackie

 <>==========================================================================<>
 <>                                                                          <>
 <>         -=---------  Hernan 'Jackie' Macapanpan                          <>
 <>       ---===              (pyrtech!hernan)                               <>
 <>     -----=====-----  Pyramid Technology Corporation       (415) 965-7200 <>
 <>   -------=======---  1295 Charleston Road, P.O. Box 7295       Ext: 6000 <>
 <> ---------=========-  Mountain View, CA  94039-7295                       <>
 <>                                                                          <>
 <>==========================================================================<>