Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!sri-unix!sri-spam!ames!ucbcad!ucbvax!CORY.BERKELEY.EDU!dillon
From: dillon@CORY.BERKELEY.EDU.UUCP
Newsgroups: comp.sys.amiga
Subject: Re: DTERM 1.10
Message-ID: <8705051630.AA11353@cory.Berkeley.EDU>
Date: Tue, 5-May-87 12:30:46 EDT
Article-I.D.: cory.8705051630.AA11353
Posted: Tue May  5 12:30:46 1987
Date-Received: Thu, 7-May-87 02:14:22 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Lines: 15


>		I can't seem to get xreceive or xtransmit to work. I've
>	tried all parity, stop, bits and command line options. It hangs
>	without even transfering a packet and times out. Actually, at
>	"bits 8 parity off", it does transfer 1 packet but gets errors

	Hmmm... (well, obviously, the XMODEM stuff in DTERM works for me).
However, the documentation isn't very clear on the matter and several people
have pointed out to me that I should always switch to 8bits-none when doing
the XMODEM protocol... which I don't.

	Try logging onto the BBS initially using 8-bits/no parity, then
see if XMODEM works.  As soon as I know what's wrong, I'll update DTERM.

					-Matt