Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!ut-sally!husc6!mit-eddie!genrad!decvax!ucbvax!NMFECC.ARPA!SECRIST%OAK.SAINET.MFENET
From: SECRIST%OAK.SAINET.MFENET@NMFECC.ARPA
Newsgroups: comp.sys.apple
Subject: (none)
Message-ID: <870417100141.0a1@nmfecc.arpa>
Date: Fri, 17-Apr-87 12:01:40 EST
Article-I.D.: nmfecc.870417100141.0a1
Posted: Fri Apr 17 12:01:40 1987
Date-Received: Sun, 19-Apr-87 12:49:23 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 24

Subject: Good VT-100 and file xfer ?
Date:    Fri, 17-APR-1987 10:16 EST
Header-Disclaimer: I don't like my headers either !
X-VMS-Mail-To: APPLE,SECRIST     

Greetings gentlepersons.  Does anybody know of a terminal program that meets
the following constraints ?

DCOM wins but at work we need a DCOM-level product that also does file
transfer by KERMIT or XMODEM (either or both); furthermore we need
something that runs with more than just super serial cards.  Further,
brain-damaged add-on hardware for a terminal program loses (i.e. Softronics).

DCOM does not have ASCII or KERMIT.
ASCII EXPRESS v4.3P does not have VT-100.
ACCESS // only supports super serial and does not do the term-ident sequence.

Does COMMWORKS support the terminal identification sequence (i.e. when you
send a <ESC>Z or <ESC>0c, etc. does it "ident" VT-100 correctly ?

Thanks.

rcs
SECRIST%OAK.SAInet.MFEnet@nmfecc.Arpa