Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!ut-sally!husc6!rutgers!ucla-cs!ames!ucbcad!ucbvax!wnre.aecl.CDN!delaney
From: delaney@wnre.aecl.CDN (Grant Delaney)
Newsgroups: comp.sys.apple
Subject: Porting Decom to Prodos
Message-ID: <553*delaney@wnre.aecl.cdn>
Date: Tue, 21-Apr-87 23:46:11 EST
Article-I.D.: wnre.553*delaney
Posted: Tue Apr 21 23:46:11 1987
Date-Received: Thu, 23-Apr-87 04:46:25 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 11

For any one who hasn't done it DECOM can be easily changed to PRODos
There are 2 things that have to be done in the HELLO program.  First
shorten all file names to less than 15 characters.  Secondly remove the
2 CALL 1200 statements from the HELLO program.  That's it after a check
that the program names in the data statements correspond to the file names
you should have a working version which can be transported to PRODos using
FILER, CopyII+ or some such conversion program.

By the way for IIgs users use the standard pascal Interface it works great
By the way with a few changes some one could even map it into the IIgs
key pad.