Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!cbatt!ucbvax!RITVAX.BITNET!SAW4332
From: SAW4332@RITVAX.BITNET.UUCP
Newsgroups: comp.sys.apple
Subject: Fontrix 1.5 with GS serial port
Message-ID: <8704211847.aa01506@SPARK.BRL.ARPA>
Date: Wed, 22-Apr-87 07:04:46 EST
Article-I.D.: SPARK.8704211847.aa01506
Posted: Wed Apr 22 07:04:46 1987
Date-Received: Thu, 23-Apr-87 23:38:28 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 25


Hello:

        I have been using Fontrix on my ][e, and I realy like the product.
    On upgrading to a GS, my printer was plugged into my old super serial
    card, because I had no other use for the SSC, and I had not been able
    to obtain the proper cable to tie my old Imagewriter 1 into the GS serial
    port.
        I have recieved this cable, and now, for some reason, every software
    package works with the GS serial interface, EXCEPT Fontrix ( Version
    1.5 )
        I have tried configuring as a IIc, and that doesn't work.

        As additional information, when dumping, the printer does nothing,
    but it seems as if Fontrix is attempting to send something somewhere,
    because, if I press the ESC key, the menu comes back.

        If anyone can help me, I appreciate it.  I am desporate.. I use
    Fontrix for maps, etc, and I need to be able to dump.


                        Thanks in advance,


                                Stefan A. Werner