Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-lcc!ames!ucbcad!ucbvax!rca.COM!ACTS5%VAXSWD
From: ACTS5%VAXSWD@rca.COM
Newsgroups: comp.sys.apple
Subject: so that others who tread this pass may have more slack
Message-ID: <8705011820.aa05104@SPARK.BRL.ARPA>
Date: Thu, 30-Apr-87 11:23:00 EDT
Article-I.D.: SPARK.8705011820.aa05104
Posted: Thu Apr 30 11:23:00 1987
Date-Received: Sun, 3-May-87 06:22:43 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 15

Well,
I just finished a hi-res screen dumping routine for my
Apple ][ + and okidata 192 printer and I can offer some
random tips that I have learned the hard way:
1) sending a CHR$(9) to the printer via the BASIC "PRINT"
   command won't get there.
2) sending a CHR$(13) will generate at 13 and a 10.
If you are trying to translate your hi-res screen into
down loadable characters, the above two bugs will get
you sooner or later.  The cure? I filter them out. I
make the 9's 25's and the 13's, 39's.
Of course if there is a less brain-damaged or kluged
way of doing this...

Craig () Ropeo