Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!utgpu!water!watnot!watmath!clyde!cbatt!ucbvax!NDSUVM1.BITNET!UD140469 From: UD140469@NDSUVM1.BITNET.UUCP Newsgroups: comp.sys.atari.st Subject: First CADD help Message-ID: <8704140343.AA27078@ucbvax.Berkeley.EDU> Date: Mon, 13-Apr-87 23:42:45 EST Article-I.D.: ucbvax.8704140343.AA27078 Posted: Mon Apr 13 23:42:45 1987 Date-Received: Wed, 15-Apr-87 03:05:41 EST Sender: daemon@ucbvax.BERKELEY.EDU Distribution: world Organization: The ARPA Internet Lines: 19 Received: by NDSUVM1 (Mailer X1.23) id 1818; Mon, 13 Apr 87 22:42:36 CDT Date: Mon, 13 Apr 1987 22:36 CDT From: Scott Udell Subject: First CADD help To: Hello, folks! I just received First CADD from Generic Software, and have a question about it. My RGB-based 520 is away being repaired, but I do have access to a monochrome system. Question: can drawings done on a monochrome be used on a color monitor? I could probably find the answer in the manual, but.... Also, does anyone out there have pictures they might like to share? Unfortunatly, Generic didn't put any demo pictures on the disk, and have no pictures in the manual. However, even with just ten minutes of fooling around with it and having read just a couple of pages, I think I can say that it looks like it will be a very good program. Aside from missing pictures or figures, the manual (at first glance) seems very complete... Scott Udell UD140469@NDSUVM1.BITNET