Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!orchid!clyde!rutgers!ames!cit-vax!elroy!jplpub1!jeff
From: jeff@jplpub1.UUCP
Newsgroups: comp.sys.atari.st
Subject: Uniterm to Uniterm Xfers
Message-ID: <3583@elroy.Jpl.Nasa.Gov>
Date: Wed, 15-Apr-87 02:51:38 EST
Article-I.D.: elroy.3583
Posted: Wed Apr 15 02:51:38 1987
Date-Received: Sat, 18-Apr-87 00:23:10 EST
Sender: news@elroy.Jpl.Nasa.Gov
Reply-To: jeff@jplpub1.JPL.NASA.GOV (Jeff Skaletsky)
Organization: Jet Propulsion Lab, Pasadena, CA
Lines: 29

Recently a few Atari fans were experimenting with Uniterm 1.7a and 
found that in Uniterm-to-Uniterm xmodem xfers at 19.2 kbps or 9.6 kbps,
files were getting corrupted although Uniterm reported no errors.
The block numbers would occasionally "burst", though the normal
rate seemed very slow.  Procomm (on an AT clone)-to-Uniterm at the
same speeds worked fine.  Also, U-to-U with Kermit worked fine, though
here Procomm-to-U had some errors.

Has anyone else experienced this?  Simon, do you know about this?
Have we just hit the wall with what Uniterm and the ST can do?

Thanks otherwise for a great program...



TAILFINS!! ...click...

Jeff Skaletsky
Jet Propulsion Laboratory
System Engineering Group
Computing and Communication Network Support Services

Try these:	jeff@jplpub1.JPL.NASA.GOV
		seismo!cit-vax!elroy!jplpub1!jeff
		elroy!jplpub1!jeff@csvax.caltech.edu
		jeff@jpl-milvax.ARPA

Mail: 464 W. Woodbury Rd.  Altadena, CA 91001
Phone: (818)354-7677