Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!seismo!mcvax!ukc!dcl-cs!bath63!sc_dra
From: sc_dra@bath63.UUCP
Newsgroups: comp.sys.atari.st
Subject: Re: Megamax inline assembly woes
Message-ID: <1058@bath63.ux63.bath.ac.uk>
Date: Tue, 5-May-87 04:47:26 EDT
Article-I.D.: bath63.1058
Posted: Tue May  5 04:47:26 1987
Date-Received: Fri, 8-May-87 01:33:23 EDT
References: <8705030519.AA18707@ucbvax.Berkeley.EDU>
Reply-To: sc_dra@ux63.bath.ac.uk (Dave Allum)
Distribution: world
Organization: SWURCC, University of Bath, UK
Lines: 4
Summary: The answer!


The registers have to be in upper case, i.e. A0, D3 etc.  Also SP is not
recognised so use A7 or put a #define SP A7 in your program.  From memory
the Megamax manual does mention the upper case requirement.