Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!uwvax!uwmacc!uwmcsd1!csd4.milw.wisc.edu!cmaag
From: cmaag@csd4.milw.wisc.edu (Christopher N Maag)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Does NEC Multisync work with new VDI?
Message-ID: <2019@uwmcsd1.UUCP>
Date: Fri, 24-Apr-87 15:23:52 EST
Article-I.D.: uwmcsd1.2019
Posted: Fri Apr 24 15:23:52 1987
Date-Received: Sat, 25-Apr-87 23:44:24 EST
References: <1631@bnrmtv.UUCP> <371@gssc.UUCP>
Sender: daemon@uwmcsd1.UUCP
Reply-To: cmaag@csd4.milw.wisc.edu.UUCP (Christopher N Maag)
Organization: U of WI-Milwaukee, Computing Services Division
Lines: 7
Summary: Multiscan type monitors will work...

According to many of the multiscanning monitor makers, including NEC and
Thomson, their monitors will work with the new graphics controllers found
in the new IBM PS/2 line.  The only problem is that you need to get an adapter
to convert from the 15-pin connector to the 9-pin connector.  These should
be readily available from the manufacturers in a few weeks.  If you are 
curious about this topic, you will want to take a look at the latest issue 
of PC Week, as it has a detailed atricle about this subject.