Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!gatech!hubcap!ncrcae!ncr-sd!hp-sdd!artecon!macbeth
From: macbeth@artecon.artecon.UUCP (Beckwith)
Newsgroups: comp.sys.mac
Subject: PC/Mac Tape Backup
Message-ID: <425@artecon.artecon.UUCP>
Date: Thu, 23-Apr-87 10:38:06 EST
Article-I.D.: artecon.425
Posted: Thu Apr 23 10:38:06 1987
Date-Received: Sat, 25-Apr-87 14:44:47 EST
Reply-To: macbeth@artecon.UUCP ()
Distribution: na
Organization: artecon
Lines: 24

I'm posting this for a friend. Thanks in advance for any help you can provide.

==============================================================================

Here's the scenario:

MacPlus and IBM PC XT connected via Apple Talk with TOPS networking software. 
The Mac has an HD20 hard disk published on the network as a single volume.  The
PC has the HD20 mounted as volume H:.  An ALLOY 1/4" tape backup is attached to
the PC running ALLOY Tip6 software.  

What I am trying to do is use the ALLOY tape backup to backup H:/*.* (i.e. the
HD20 over the network).  It works fine for a while but then stops before comp-
leting the backup.  The place where it stops is random.

Any ideas how I can make this work?

==============================================================================

-- 
===============================================================================
+            The Company supports my family, not my opinions.                  +
+                        David Macy-Beckwith                                   +
+         {hplabs|sdcsvax|ncr-sd|hpfcla|ihnp4}!hp-sdd!artecon!macbeth          +