Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!mcvax!jaap
From: jaap@mcvax.cwi.nl (Jaap Akkerhuis)
Newsgroups: comp.text
Subject: Re: tektronix & troff files to laserwriter
Message-ID: <249@sering.mcvax.cwi.nl>
Date: Mon, 20-Apr-87 17:25:55 EST
Article-I.D.: sering.249
Posted: Mon Apr 20 17:25:55 1987
Date-Received: Tue, 21-Apr-87 06:07:50 EST
References: <5584@shemp.UCLA.EDU>
Reply-To: jaap@sering.UUCP (Jaap Akkerhuis)
Distribution: world
Organization: CWI, Amsterdam
Lines: 17
Keywords: tektronix,troff,pscat,laserwriter

In article <5584@shemp.UCLA.EDU> marco@MATH.UCLA.EDU (Marco M. Mostrel) writes:
 > 
 > Is there any way to include tektronix files in a troff document for output
 > to a laserwriter?

Information send to me by UEL (Unix Europe London) gave the impression that
there is a preprocessor for this available from the toolchest.

 > I'd like to be able to do something like .so graphfile where graphfile is
 > a Tektronix file, but with graphfile not preprocessed by troff or processed in
 > such a way that it would be inserted as a figure in the final document.
 > Is that at all possible?

If you have TranScript, you might mock around with the output of ps4014
and pass it through troff using .cf file. It might work...

Good luck, jaap