Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!mcnc!rti-sel!tijc02!seb022
From: seb022@tijc02.UUCP (Scott Bemis         )
Newsgroups: comp.unix.questions,comp.unix.wizards
Subject: uda50 delay settings
Message-ID: <147@tijc02.UUCP>
Date: Wed, 22-Apr-87 14:23:29 EST
Article-I.D.: tijc02.147
Posted: Wed Apr 22 14:23:29 1987
Date-Received: Fri, 24-Apr-87 05:42:05 EST
Organization: Texas Instr., Johnson City TN
Lines: 17
Xref: mnetor comp.unix.questions:2015 comp.unix.wizards:2004



From: Scott Bemis   mcnc!rti-sel!tijc02
	Texas Instruments, Johnson City, Tennessee
	Phone: (615) 461-2959



	I am currently running Uniq Digital's UNIX V Release 2.0 Version 2
	on a VAX 8600.  I would like to know the lowest delay settings
	I can set on my UDA50 disk controllers.

	According to my DEC Field Service rep., there are three delay
	settings for UDA50 controllers. They are 10 milliseconds,  6.2
	milliseconds, and 0 milliseconds. I would like to know if any
	one has had any problems using the 0 milliseconds delay on the
	UDA50 disk controllers.