Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!munnari!otc!metro!basser!wacsvax!wapsyvax!doug
From: doug@wapsyvax.OZ (Doug Robb)
Newsgroups: comp.unix.wizards
Subject: dr11w "driver"
Message-ID: <253@wapsyvax.OZ>
Date: Mon, 4-May-87 03:49:58 EDT
Article-I.D.: wapsyvax.253
Posted: Mon May  4 03:49:58 1987
Date-Received: Wed, 6-May-87 05:37:19 EDT
Organization: Psychology, University of Western Australia
Lines: 13

I have a micro-vax, running Ultrix 1.2, which is about to have
a DR11w installed in it. This request bobs up every now and again
so here we go again ......
Has anyone got a "driver" for this card? I realize that people like
to say that there is no such thing as a dr11 driver (because it depends on
what hangs off the dr11) so let me say that what I really need to know
is how to control the dr11 and pass information back and forth. 
How to ioctl through it?
This should be common to most (all?) people who have a dr11. 
After doing this knocking up the driver for whatever device you have hanging
off it should be staightforward. In may case its a digital filter/frame store. 
If somebody has such a beast would they be kind enough to 
contact/send it to  me? Thanks in anticipation.