Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!seismo!ll-xn!ames!ptsfa!ihnp4!ihlpl!reza0
From: reza0@ihlpl.UUCP
Newsgroups: comp.unix.xenix
Subject: Problem:coming in on Hayes internal 2400 baud modem on SCO
Message-ID: <1993@ihlpl.ATT.COM>
Date: Tue, 14-Apr-87 09:22:36 EST
Article-I.D.: ihlpl.1993
Posted: Tue Apr 14 09:22:36 1987
Date-Received: Wed, 15-Apr-87 06:11:29 EST
Organization: AT&T Bell Laboratories - Naperville, Illinois
Lines: 17

Ok, I give up.  I have been trying to set up a Hayes 2400 baud internal
modem on a Sperry IT (an AT clone) running SCO 2.1.3 with little 
success.  I have taken out all the other serial cards out of this machine.
The modem is set up to work on COM2 and I have edited /etc/ttys to
say: 12tty11, (running this modem at 1200 baud).  I have tested
them modem under DOS and it works fine and answers the phone and 
gives carrier.  Unfortunately, under SCO, the phone is answered
but no carrier.  I am not familiar with XENIX that much, but when
I do the ps -ef after having modifed /etc/ttys, all that is
running is tty11, not getty.  (inittab is a lot easier to deal with).
Please give me some help.  I am desparate.

Please reply via e-mail.

Reza Zarafshar,
ihnp4!ihlpl!reza0
(312)979-5104