Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!mit-eddie!genrad!decvax!ucbvax!apollo.UUCP!mishkin%UUCP
From: mishkin%UUCP@apollo.UUCP.UUCP
Newsgroups: mod.computers.apollo
Subject: Re: DN3000 <--> IBM-PC/AT???
Message-ID: <8703262027.AA02712@apollo.UUCP>
Date: Thu, 26-Mar-87 15:07:21 EST
Article-I.D.: apollo.8703262027.AA02712
Posted: Thu Mar 26 15:07:21 1987
Date-Received: Sat, 28-Mar-87 14:47:15 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 16
Approved: apollo@yale-comix.arpa


    I once read an article claiming that you could run an IBM-PC
    application in an AEGIS window using a DN3000. Is this really
    possible?
    
Apollo has a product called DOMAIN/PCC (PC Coprocessor).  It's a board
that plugs into the DN3000's AT bus.  It has a 286, 1MB memory, runs
MS/DOS, mounts the DOMAIN file system as device "D:" (i.e. you can
access any Apollo file from a PC program), and has hardware support for
displaying output in an Apollo window.  It can also access the DN3000's
floppy disk directly.

            -- Nat Mishkin
               Apollo Computer Inc.

-------