Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!princeton!allegra!ulysses!gamma!mb2c!ccd700!reh
From: reh@ccd700.UUCP
Newsgroups: comp.dcom.modems
Subject: Re: adm3a control `g` problem
Message-ID: <628@ccd700.UUCP>
Date: Wed, 6-May-87 15:17:54 EDT
Article-I.D.: ccd700.628
Posted: Wed May  6 15:17:54 1987
Date-Received: Fri, 8-May-87 04:46:31 EDT
References: <344@dasys1.UUCP> <12299739466.49.S.PAE@DEEP-THOUGHT.MIT.EDU>
Distribution: world
Organization: Ford CCD, Dearborn Michigan
Lines: 13
Summary: ^G (bell) and pin 22 (ring detect) don't mix on an ADM3A

>     ...
>     Whenever the terminal receives a control`g`
>     ...
We cut pin 22 to fix the problem.  ^G does bad things depending on
pin 22 (ring indicator).
......................................................................
Bob Harold                      313-845-5404   
Ford Motor Co.                  ...!ihnp4!mb2c!ccd700!eed090!bob
DPTC room B-206          
17000 Rotunda Drive             Disclaimer: The views expressed might
Dearborn, MI 48121-6010         not be those of my employer or myself
Have questions about life?  Read the original design manual - the Bible.
......................................................................