Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!husc6!harvard!ksr!alcatraz!benson
From: benson@alcatraz.ksr.com (Benson Margulies)
Newsgroups: comp.protocols.appletalk
Subject: Need Help with Kip/Cap
Message-ID: <113@ksr.UUCP>
Date: Wed, 13-May-87 21:21:54 EDT
Article-I.D.: ksr.113
Posted: Wed May 13 21:21:54 1987
Date-Received: Sat, 16-May-87 07:21:25 EDT
Sender: nobody@ksr.UUCP
Reply-To: benson@ksr.UUCP ()
Distribution: world
Organization: Kendall Square Research, Cambridge MA
Lines: 26


experiment 1: running the same UDP.srec, and the same kinetics config
file, I set up the KIP files and launched atalkad, and then tried out 
various CAP things. I can't use the KIP ddt because I don't have a
vax, and the code don't seem to be compilable on a sun. All I see is
that the CAP samples can't find anything to talk to. I also don't have
a ping on the Mac side.

experiment 2: I used PC-link to slurp the AT.SREC.3 file that is in
the archive with KIP, and loaded that into the kinetics. Now neither
pc-link nor cap gets anyplace.

On the other hand, I used my usual config file. It seems benign, but
it does force the ktalk/prompt to show the UDP button instead of the
DDP button, which makes me suspicious.

Can anyone help me get CAP on the air? If I succeed, what code should
I be using for file transfer? The mac-ip we got don't work with a hard
disk, because it requires a driver to be in the system file but
dosen't come with an installer script.

glurp.

Benson I. Margulies                         Kendall Square Research Corp.
harvard!ksr!benson			    All comments the responsibility
ksr!benson@harvard.harvard.edu		    of the author, if anyone.