Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!ames!sdcsvax!ucbvax!rust.DEC.COM!kjd
From: kjd@rust.DEC.COM (Kevin J. Dunlap - DECwest Engineering)
Newsgroups: comp.protocols.tcp-ip
Subject: Re: .rev files and gethostbyaddr
Message-ID: <8705271521.AA05335@sonora.dec.com>
Date: Wed, 27-May-87 11:21:52 EDT
Article-I.D.: sonora.8705271521.AA05335
Posted: Wed May 27 11:21:52 1987
Date-Received: Fri, 29-May-87 06:35:29 EDT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: world
Organization: The ARPA Internet
Lines: 23


 
>>
>>	The problem seems to be in the .rev files for named.  We have
>>quite a few subnets, and had one file for each, and it (gethostbyaddr)
>>was working fine but the configuration would crash the nameserver...
>>The documentation I have is of no use.  Does anyone have a WORKING set
>>of .rev files (and the boot file) for multiple subnets that I could see?
>>
>>						-Chris Welty
>>						 weltyc@cs.rpi.edu
 
This question belongs in the bind@usbarpa.Berkeley.EDU mailing list not TCP/IP,
so any further discussion should be continued their.  For subscription
send to bind-request@ucbarpa.berkeley.edu.
 
The examples in the BIND distribution (anonymous ftp from ucbarpa pub/bind.tar)
are working examples.  Also, the examples in "Name Server Operations Guide
for BIND" are working examples.  Have you read this document found
in the 4.3BSD System Manager's Manual?  You must have missed section 4.1
page SMM:11-3
 
-Kevin Dunlap