Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!cbmvax!grr
From: grr@cbmvax.cbm.UUCP (George Robbins)
Newsgroups: comp.sys.amiga
Subject: Re: Amiga Disk & HAM problems
Message-ID: <1839@cbmvax.cbmvax.cbm.UUCP>
Date: Wed, 6-May-87 06:55:29 EDT
Article-I.D.: cbmvax.1839
Posted: Wed May  6 06:55:29 1987
Date-Received: Sat, 9-May-87 00:43:19 EDT
References: <8705060633.AA10982@cory.Berkeley.EDU>
Reply-To: grr@cbmvax.UUCP (George Robbins)
Organization: Commodore Technology, West Chester, PA
Lines: 16

In article <8705060633.AA10982@cory.Berkeley.EDU> dillon@CORY.BERKELEY.EDU (Matt Dillon) writes:
>
>>Now, my Amiga also has another problem.  When I display the 'brick.img'
>>ray-traced DBW picture a section of a line (about 1 inch long) half way down
>>the screen will flicker from what it should be to a solid line of
>
>	The DWB ray-traced pictures are INTERLACE HAM pictures.  Thus, unless
>you have a high persistance display, you get the interlace flicker.

Also, some older Amiga's contain have Denise chips that aren't too awfully
good at Ham mode.  You man need to obtain a Rev 6 or later Denise upgrade...

-- 
George Robbins - now working for,	uucp: {ihnp4|seismo|rutgers}!cbmvax!grr
but no way officially representing	arpa: cbmvax!grr@seismo.css.GOV
Commodore, Engineering Department	fone: 215-431-9255 (only by moonlite)