Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!cbmvax!andy
From: andy@cbmvax.UUCP
Newsgroups: comp.sys.amiga
Subject: Re: Drive Step times
Message-ID: <1856@cbmvax.cbmvax.cbm.UUCP>
Date: Thu, 7-May-87 19:24:58 EDT
Article-I.D.: cbmvax.1856
Posted: Thu May  7 19:24:58 1987
Date-Received: Sat, 9-May-87 07:04:49 EDT
References: <8705071902.AA08439@cory.Berkeley.EDU>
Reply-To: andy@cbmvax.UUCP (Andy Finkel)
Organization: Commodore Technology, West Chester, PA
Lines: 17

In article <8705071902.AA08439@cory.Berkeley.EDU> dillon@CORY.BERKELEY.EDU (Matt Dillon) writes:
>	You can change the drive step rates by looking at the TDU_PublicUnit
>	The numbers don't make much sense though, and there is no documentation
>on their format.  (Anybody at Commodore care to enlighten us?)
The number is in microseconds.  The field name is TDU_STEPDELAY in the
TDU_PUBLICUNIT structure. (tdu_StepDelay in the TDU_PublicUnit structure 
for the C crowd)  
>				-Matt
-- 
andy finkel		{ihnp4|seismo|allegra}!cbmvax!andy 
Commodore/Amiga		 /or/ pyramid!amiga!andy }

"Do not meddle with the affairs of wizards, for it makes them soggy and hard 
to light."

Any expressed opinions are mine; but feel free to share.
I disclaim all responsibilities, all shapes, all sizes, all colors.