Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!ames!oliveb!amiga!dale
From: dale@amiga.UUCP
Newsgroups: comp.sys.amiga
Subject: composite output
Message-ID: <1657@amiga.amiga.UUCP>
Date: Tue, 12-May-87 02:44:35 EDT
Article-I.D.: amiga.1657
Posted: Tue May 12 02:44:35 1987
Date-Received: Thu, 14-May-87 04:51:02 EDT
Reply-To: dale@amiga.UUCP (Dale Luck)
Organization: Commodore-Amiga Inc., 16795 Lark Ave. Suite 106, Los Gatos CA 95030
Lines: 16


When we hooked an amiga up to a kloss rgb projector at siggraph we
found we had some interface problems. One of the things we found
was a dc component on the composite output that this projector
was not happy with it. I don't know if that ever got fixed
on the A1000's and I know it doesn't work on the A500 or A2000.
(but for a different reason: lack of NTSC composite output).
I solved the problem temporarily by sending the composite through
a vcr and taking the output of the vcr. The vcr didn't mind the
dc on the composite in and removed it before passing it to the projector.

There may be a similar style problem with rgb but I don't know that as
well. I called Kloss about this and they said they had a special box
that they send the amiga stuff through before plugging it into their
projector.
Duck