Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watmath!clyde!rutgers!cbmvax!carolyn
From: carolyn@cbmvax.UUCP
Newsgroups: comp.sys.amiga
Subject: Re: Dropshadow+VT100.2.6
Message-ID: <1906@cbmvax.cbmvax.cbm.UUCP>
Date: Wed, 20-May-87 10:34:52 EDT
Article-I.D.: cbmvax.1906
Posted: Wed May 20 10:34:52 1987
Date-Received: Fri, 22-May-87 00:46:23 EDT
References: <58@f.gp.cs.cmu.edu>
Reply-To: carolyn@cbmvax.UUCP (Carolyn Scheppner CATS)
Organization: Commodore Technology, West Chester, PA
Lines: 19

In article <58@f.gp.cs.cmu.edu> mjw@f.gp.cs.cmu.edu (Michael Witbrock) writes:
>
>VT100 is great, so is dropshadow, however:
>
>   When you run VT100 on a machine on  which dropshadow is also running,
>It keeps on saying 
>took signal 40000000 
>This is also transmitted to the host computer. This is nasty.

  This is not VT100's fault.  That version of Dropshadow still contained
its debugging kprintf's which are sending debugging info out the serial
port.  Get Dropshadow 2.0.

-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Carolyn Scheppner -- CBM   >>Amiga Technical Support<<
                     UUCP  ...{allegra,caip,ihnp4,seismo}!cbmvax!carolyn 
                     PHONE 215-431-9180
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=